mirror of
https://github.com/arcan1s/ahriman.git
synced 2025-04-24 15:27:17 +00:00
Evgeniy Alekseev
04174a3e6d
In current workflow you need to run setup to run init (because of repository name), but you need to run init before setup (because of repository tree rights). New solution just add `Repo.init()` method call to setup subcommand after config reload to make sure that repository name has been applied. In addition chown method as well as setuid method for check_output have been added.
66 lines
2.6 KiB
Markdown
66 lines
2.6 KiB
Markdown
# Setup instructions
|
|
|
|
1. Install package as usual.
|
|
2. Change settings if required, see [configuration reference](configuration.md) for more details.
|
|
3. TL;DR
|
|
|
|
```shell
|
|
sudo ahriman -a x86_64 repo-setup ...
|
|
```
|
|
|
|
`repo-setup` literally does the following steps:
|
|
|
|
1. Create `/var/lib/ahriman/.makepkg.conf` with `makepkg.conf` overrides if required (at least you might want to set `PACKAGER`):
|
|
|
|
```shell
|
|
echo 'PACKAGER="John Doe <john@doe.com>"' | sudo -u ahriman tee -a /var/lib/ahriman/.makepkg.conf
|
|
```
|
|
|
|
2. Configure build tools (it is required for correct dependency management system):
|
|
|
|
1. Create build command, e.g. `ln -s /usr/bin/archbuild /usr/local/bin/ahriman-x86_64-build` (you can choose any name for command, basically it should be `{name}-{arch}-build`).
|
|
2. Create configuration file, e.g. `cp /usr/share/devtools/pacman-{extra,ahriman}.conf` (same as previous `pacman-{name}.conf`).
|
|
3. Change configuration file, add your own repository, add multilib repository etc;
|
|
4. Set `build_command` option to point to your command.
|
|
5. Configure `/etc/sudoers.d/ahriman` to allow running command without a password.
|
|
|
|
```shell
|
|
ln -s /usr/bin/archbuild /usr/local/bin/ahriman-x86_64-build
|
|
cp /usr/share/devtools/pacman-{extra,ahriman}.conf
|
|
|
|
echo '[multilib]' | tee -a /usr/share/devtools/pacman-ahriman.conf
|
|
echo 'Include = /etc/pacman.d/mirrorlist' | tee -a /usr/share/devtools/pacman-ahriman.conf
|
|
|
|
echo '[aur-clone]' | tee -a /usr/share/devtools/pacman-ahriman.conf
|
|
echo 'SigLevel = Optional TrustAll' | tee -a /usr/share/devtools/pacman-ahriman.conf
|
|
echo 'Server = file:///var/lib/ahriman/repository/$arch' | tee -a /usr/share/devtools/pacman-ahriman.conf
|
|
|
|
echo '[build]' | tee -a /etc/ahriman.ini.d/build.ini
|
|
echo 'build_command = ahriman-x86_64-build' | tee -a /etc/ahriman.ini.d/build.ini
|
|
|
|
echo 'Cmnd_Alias CARCHBUILD_CMD = /usr/local/bin/ahriman-x86_64-build *' | tee -a /etc/sudoers.d/ahriman
|
|
echo 'ahriman ALL=(ALL) NOPASSWD: CARCHBUILD_CMD' | tee -a /etc/sudoers.d/ahriman
|
|
chmod 400 /etc/sudoers.d/ahriman
|
|
```
|
|
|
|
4. Start and enable `ahriman@.timer` via `systemctl`:
|
|
|
|
```shell
|
|
systemctl enable --now ahriman@x86_64.timer
|
|
```
|
|
|
|
5. Start and enable status page:
|
|
|
|
```shell
|
|
systemctl enable --now ahriman-web@x86_64
|
|
```
|
|
|
|
6. Add packages by using `ahriman package-add {package}` command:
|
|
|
|
```shell
|
|
sudo -u ahriman ahriman -a x86_64 package-add ahriman --now
|
|
```
|
|
|
|
## User creation
|
|
|
|
`user-add` subcommand is recommended for new user creation. |