AboutAboutAboutAcknowledgementAcknowledgementAboutWindowVersion %1
(build date %2)Version %1
(build date %2)Qt-based graphical interface for netctl.Qt-based graphical interface for netctl.Links:Links:HomepageHomepageRepositoryRepositoryBugtrackerBugtrackerTranslation issueTranslation issueAUR packagesAUR packagesThis software is licensed under %1This software is licensed under %1AboutAboutTranslators: %1Translators: %1This software uses: %1This software uses: %1BridgeWidgetFormFormBridge settingsBridge settingsSkip (R)STP and immediately activate all bridge membersSkip (R)STP and immediately activate all bridge membersSkip forwarding delaySkip forwarding delayErrorWindowCould not find componentsCould not find componentsDoes not support yetDoes not support yetProfile name is not setProfile name is not setBind interfaces are not setBind interfaces are not setDescription is not setDescription is not setIp settings are not setIp settings are not setConfiguration file does not existConfiguration file does not existKey is not setKey is not setWireless settings are not setWireless settings are not setConfiguration file is not setConfiguration file is not setESSID is not setESSID is not setMAC address is incorrectMAC address is incorrectSession ID is not setSession ID is not setAPN is not setAPN is not setEmpty user/group nameEmpty user/group nameUnknown errorUnknown errorErrorErrorError textError textOkOkError!Error!Could not find profileCould not find profileCould not find ESSIDCould not find ESSIDSender : %1Sender : %1Could not run helperCould not run helperUser is not in network group, helper will not be startedUser is not in network group, helper will not be startedIP address does not match the standardIP address does not match the standardEthernetWidgetSelect wpa configuration fileSelect wpa configuration fileConfiguration files (*.conf)Configuration files (*.conf)Hide advancedHide advancedShow advancedShow advancedFormFormEthernet optionsEthernet options<html><head/><body><p>Whether or not the absence of a carrier is acceptable</p></body></html>Whether or not the absence of a carrier is acceptableSkip no carrierSkip no carrierSet to ‘yes’ to use 802.1x authenticationSet to ‘yes’ to use 802.1x authentication802.1x authentication802.1x authenticationWPA config fileWPA config filePath to a wpa_supplicant configuration filePath to a wpa_supplicant configuration fileBrowseBrowseWPA driverWPA driverwiredwirednl80211nl80211wextwextThe wpa_supplicant driver to use for 802.1x authenticationThe wpa_supplicant driver to use for 802.1x authenticationTimeout carrierTimeout carrierMaximum time, in seconds, to wait for a carrierMaximum time, in seconds, to wait for a carrierTimeout WPATimeout WPAMaximum time, in seconds, to wait for 802.1x authentication to succeedMaximum time, in seconds, to wait for 802.1x authentication to succeedGeneralWidgetHide advancedHide advancedShow advancedShow advancedFormFormGeneralGeneralDescriptionDescription<html><head/><body><p>A description of the profile</p></body></html>A description of the profileConnectionConnectionThe connection type used by the profileThe connection type used by the profileInterfaceInterfaceThe name of the associated network interfaceThe name of the associated network interfaceBinds to interfacesBinds to interfacesAddAddAn array of physical network interfaces that this profile needs before it can be startedAn array of physical network interfaces that this profile needs before it can be startedAfterAfterAn array of profile names that should be started before this profile is startedAn array of profile names that should be started before this profile is startedCommand after startingCommand after startingA command that is executed after a connection is establishedA command that is executed after a connection is establishedCommand before stopingCommand before stopingA command that is executed before a connection is brought downA command that is executed before a connection is brought downSet to ‘yes’ to force connecting even if the interface is upSet to ‘yes’ to force connecting even if the interface is upForce connectForce connectDebug modeDebug modeA description of the profileA description of the profileIpWidgetHide advancedHide advancedShow advancedShow advancedFormFormIP optionsIP optionsIPIPdhcpdhcpstaticstaticAddressAddressAddAddAn array of IP addresses suffixed with ‘/<netmask>’An array of IP addresses suffixed with ‘/<netmask>’GatewayGatewayAn IP routing gateway addressAn IP routing gateway addressIP6IP6dhcp-noaddrdhcp-noaddrstatelessstatelessAddress6Address6An array of IPv6 addressesAn array of IPv6 addressesGateway6Gateway6An IPv6 routing gateway addressAn IPv6 routing gateway addressRoutesRoutesAn array of custom routesAn array of custom routesviaviaAn array of physical network interfaces that this profile needs before it can be startedAn array of physical network interfaces that this profile needs before it can be startedRoutes6Routes6CustomCustomAn array of argument lines to pass to ipAn array of argument lines to pass to ipHostnameHostnameA system hostnameA system hostnameTimeout DADTimeout DADSet to ‘yes’ to release the DHCP lease when the profile is stoppedSet to ‘yes’ to release the DHCP lease when the profile is stoppedDHCP clientDHCP clientdhcpcddhcpcddhclientdhclientThe name of the preferred DHCP clientThe name of the preferred DHCP clientdhcpcd optionsdhcpcd optionsAdditional options to be passed to the DHCP clientAdditional options to be passed to the DHCP clientdhclient optionsdhclient optionsdhclient options (6)dhclient options (6)Timeout DHCPTimeout DHCPMaximum time, in seconds, to wait for DHCP to be successfulMaximum time, in seconds, to wait for DHCP to be successfulDHCP release on stopDHCP release on stopDNSDNSAn array of DNS nameserversAn array of DNS nameserversDNS domainDNS domainA ‘domain’ line for /etc/resolv.confA ‘domain’ line for /etc/resolv.confDNS searchDNS searchA ‘search’ line for /etc/resolv.confA ‘search’ line for /etc/resolv.confDNS optionsDNS optionsAn array of ‘options’ lines for /etc/resolv.confAn array of ‘options’ lines for /etc/resolv.confMaximum time, in seconds, to wait for IPv6’s Duplicate Address Detection to succeedMaximum time, in seconds, to wait for IPv6’s Duplicate Address Detection to succeedShould be in CIDR form according to standardsShould be in CIDR form according to standardsAn IP routing gateway address.
Should be according to standardsAn IP routing gateway address.
Should be according to standardsAn IPv6 routing gateway address.
Should be according to standardsAn IPv6 routing gateway address.
Should be according to standardsShould be according to standardsShould be according to standardsMacvlanWidgetFormFormmacvlan settingsmacvlan settingsModeModeMAC addressMAC addressOnly connect to specified MAC addressOnly connect to specified MAC addressOptional static MAC addressOptional static MAC addressMainWidgetStopStopStartStartDisableDisableEnableEnableNameNameDescriptionDescriptionActiveActiveEnabledEnabledTypeTypeIs wirelessIs wirelessRefreshRefreshStart profileStart profileRestart profileRestart profileEnable profileEnable profileEdit profileEdit profileRemove profileRemove profileStop profileStop profileDisable profileDisable profileRefresh tableRefresh tableCtrl+RCtrl+RStart or stop selected profileStart or stop selected profileSwitchSwitchSwitch to selected profileSwitch to selected profileRestartRestartRestart selected profileRestart selected profileEnable or disable selected profileEnable or disable selected profileStop allStop allStop all profilesStop all profilesEditEditEdit selected profileEdit selected profileRemoveRemoveRemove selected profileRemove selected profilenetctl-auto is runningnetctl-auto is runningMain actions toolbarMain actions toolbarMainWindowReadyReadyUpdatedUpdatedErrorErrorDoneDoneStopStopStartStartDisableDisableEnableEnableSave profile as...Save profile as...Profile (*)Profile (*) Netctl GUI
Netctl GUI
Version : %1 License : GPLv3
Version : %1 License : GPLv3
Evgeniy Alekseev aka arcanis
Evgeniy Alekseev aka arcanis
E-mail : esalexeev@gmail.com
E-mail : esalexeev@gmail.com
Usage:
Usage:
netctl-gui [ --default ] [ -t NUM | --tab NUM ] [ -h | --help]
netctl-gui [ --default ] [ -t NUM | --tab NUM ] [ -h | --help]
Parametrs:
Parametrs:
--default - start with default settings
--default - start with default settings
-t NUM --tab NUM - open a tab with number NUM
-t NUM --tab NUM - open a tab with number NUM
-h --help - show this help and exit
-h --help - show this help and exit
Netctl GUINetctl GUISettingsSettingsCtrl+SCtrl+SQuitQuitCtrl+QCtrl+QNameNameDescriptionDescriptionStatusStatusRefreshRefreshCtrl+RCtrl+RRestartRestartConnect to profileConnect to profileProfileProfileBrowseBrowseClearClearLoadLoadSaveSaveCreate a new profileCreate a new profilePlease install 'wpa_supplicant' before using itPlease install 'wpa_supplicant' before using itSignalSignalSecuritySecurityConnect to Wi-FiConnect to Wi-FiMenuMenuName Status Signal SecurityName Status Signal SecurityName Description StatusName Description StatusRemoveRemoveStop profileStop profileStart profileStart profileDisable profileDisable profileEnable profileEnable profileStop WiFiStop WiFiStart WiFiStart WiFiRestart profileRestart profileEdit profileEdit profileRemove profileRemove profileLoad profileLoad profileSave profileSave profileStart Wi-FiStart Wi-Finetctl-autonetctl-autoActionsActionsName==Description==StatusName==Description==StatusName==Status==Signal==SecurityName==Status==Signal==SecurityUnknown flag
Unknown flag
Usage:Usage:Parametrs:Parametrs:Open window:Open window:show about windowshow about windowshow netctl-auto windowshow netctl-auto windowshow settings windowshow settings windowFunctions:Functions:select ESSID %1select ESSID %1open profile %1open profile %1select profile %1select profile %1Additional flags:Additional flags:print debug informationprint debug informationstart with default settingsstart with default settingsset options for this run, comma separatedset options for this run, comma separatedopen a tab with number %1open a tab with number %1Show messages:Show messages:show version and exitshow version and exitshow build information and exitshow build information and exitshow this help and exitshow this help and exitBuild date: %1Build date: %1cmake flags:cmake flags:Version : %1
Version : %1
Author : %1
Author : %1
License : %1
License : %1
AboutAboutnetctl-auto is runningnetctl-auto is runningShowShowHelpHelpread configuration from file %1read configuration from file %1VersionVersionAuthorAuthorLicenseLicenseread configuration from this fileread configuration from this fileReport a bugReport a bugyesyesnonoActiveActiveEnabledEnabledExistsExistsESSIDESSIDstart maximizedstart maximizedstart minimizedstart minimizedOptions:Options:start as daemonstart as daemonstart minimized to traystart minimized to trayselect this ESSIDselect this ESSIDopen this profileopen this profileselect this profileselect this profileopen a tab with this numberopen a tab with this numbercmake flagscmake flagsDBus configurationDBus configurationDBus API referenceDBus API referenceSecurity notesSecurity notesLibrary documentationLibrary documentationDocumentationDocumentationRestore existing session.Restore existing session.Close existing session.Close existing session.Switch to profileSwitch to profileStop all profilesStop all profilesstart detached from consolestart detached from consoleConnection is successfully.Connection is successfully.Connection failed.Connection failed.Do you want to save profile %1?Do you want to save profile %1?WiFi menuWiFi menuSwitchSwitchStop allStop allEditEditDBus APIDBus APILibraryLibrarycmake propertiescmake propertiesComponentsComponentsAdditional componentsAdditional componentsProject propertiesProject propertiesConnection is successfullyConnection is successfullyConnection failedConnection failedInformationInformationApplication has been hidden to trayApplication has been hidden to trayShow security notesShow security notesShow DBus APIShow DBus APIShow library docsShow library docsAbout this applicationAbout this applicationnetctl controlnetctl controlCtrl+NCtrl+NProfilesProfilesCtrl+PCtrl+PCtrl+WCtrl+WToolbarToolbarMobileWidgetSelect options fileSelect options fileConfiguration files (*.conf)Configuration files (*.conf)Hide advancedHide advancedShow advancedShow advancedFormFormMobile PPP settingsMobile PPP settingsUsernameUsernameThe username and password to connect withThe username and password to connect withPasswordPasswordAccess point nameAccess point nameThe access point (apn) to connect onThe access point (apn) to connect onPINPINIf your modem requires a PIN to unlock, use this optionIf your modem requires a PIN to unlock, use this optionModeModeNoneNone3Gpref3Gpref3Gonly3GonlyGPRSprefGPRSprefGPRSonlyGPRSonlyThis option is used to specify the connection modeThis option is used to specify the connection modeMax failMax failThe number of consecutive failed connection attempts to tolerateThe number of consecutive failed connection attempts to tolerateUse the default route provided by the peerUse the default route provided by the peerDefault routeDefault routeUse the DNS provided by the peerUse the DNS provided by the peerUse peer DNSUse peer DNSOptions fileOptions fileA file to read additional pppd options fromA file to read additional pppd options fromBrowseBrowseNetctlAutoWindowMainWindowMainWindowEnable profileEnable profileSwitch to profileSwitch to profileCloseCloseMenuMenuReadyReadyDisable serviceDisable serviceEnable serviceEnable servicenetctl-auto is runningnetctl-auto is runningStop serviceStop serviceStart serviceStart servicenetctl-auto is not runningnetctl-auto is not runningName==Description==Active==DisabledName==Description==Active==DisabledyesyesUpdatedUpdatedEnable all profilesEnable all profilesDisable all profilesDisable all profilesEnableEnableDisableDisableDoneDoneErrorErrorDisable profileDisable profileEscEscRestart serviceRestart serviceRefreshRefreshNameNameDescriptionDescriptionActiveActiveDisabledDisabledSwitchSwitchnetctl-autonetctl-autononoProfileProfileEnabledEnabledStart or stop serviceStart or stop serviceEnable or disable serviceEnable or disable serviceRefresh tableRefresh tableCtrl+RCtrl+REnable or disable profileEnable or disable profileToolbarToolbarNetctlHelperBuild date: %1Build date: %1cmake flagscmake flagsDBus configurationDBus configurationDocumentationDocumentationNewProfileWidgetClearClearClear dataClear dataCtrl+RCtrl+RLoadLoadLoad selected profileLoad selected profileSaveSaveSave selected profileSave selected profileRemoveRemoveRemove selected profileRemove selected profileProfileProfileNew profile toolbarNew profile toolbarPasswdWidgetFormFormPasswordPasswordESSIDESSIDShow symbolsShow symbolsPppoeWidgetSelect options fileSelect options fileConfiguration files (*.conf)Configuration files (*.conf)Hide advancedHide advancedShow advancedShow advancedFormFormPPPoE settingsPPPoE settingsUsernameUsernameThe username and password to connect withThe username and password to connect withPasswordPasswordConnection modeConnection modepersistpersistdemanddemandThis option specifies how a connection should be establishedThis option specifies how a connection should be establishedIdle timeoutIdle timeoutThis option specifies the idle time (in seconds) after which ‘pppd’ should disconnectThis option specifies the idle time (in seconds) after which ‘pppd’ should disconnectMax failMax failThe number of consecutive failed connection attempts to tolerateThe number of consecutive failed connection attempts to tolerateUse the default route provided by the peerUse the default route provided by the peerDefault routeDefault routeUse the DNS provided by the peerUse the DNS provided by the peerUse peer DNSUse peer DNSPPP unitPPP unitSet the ppp unit number in the interface name (ppp0, ppp1, etc.)Set the ppp unit number in the interface name (ppp0, ppp1, etc.)LCP echo intervalLCP echo intervalThese options override default LCP parameters from ‘/etc/ppp/options’These options override default LCP parameters from ‘/etc/ppp/options’LCP echo failureLCP echo failureOptions fileOptions fileA file to read additional pppd options fromA file to read additional pppd options fromBrowseBrowsePPPoE servicePPPoE serviceThis option specifies the PPPoE service nameThis option specifies the PPPoE service namePPPoE ACPPPoE ACThis option specifies the PPPoE access concentrator nameThis option specifies the PPPoE access concentrator namePPPoE sessionPPPoE sessionThis option specifies an existing session to attach to, MAC addressThis option specifies an existing session to attach to, MAC addressPPPoE MACPPPoE MACOnly connect to specified MAC addressOnly connect to specified MAC addressEnable IPv6 supportEnable IPv6 supportPPPoE IPv6PPPoE IPv6SettingsWindowSelect path to directory with interfacesSelect path to directory with interfacesSelect netctl commandSelect netctl commandAll files (*)All files (*)Select path to profile directorySelect path to profile directorySelect path to directory with rfkill devicesSelect path to directory with rfkill devicesSelect sudo commandSelect sudo commandSelect wpa_cli commandSelect wpa_cli commandSelect wpa_supplicant commandSelect wpa_supplicant commandSettingsSettingsLanguageLanguageSelect a languageSelect a languageYou will need to restart the applicationYou will need to restart the applicationGeneralGeneralnetctl pathnetctl pathPath to netctlPath to netctlBrowseBrowseProfile pathProfile pathPath to profile directoryPath to profile directorynetctlnetctlsudo pathsudo pathPath to sudoPath to sudosudosudowpa_supplicant pathwpa_supplicant pathPath to wpa_supplicantPath to wpa_supplicantwpa_cli pathwpa_cli pathPath to wpa_cliPath to wpa_cliPID filePID filewpa_supplicant PID filewpa_supplicant PID filewpa_supplicant driverswpa_supplicant driverswpa_supplicant drivers comma separatedwpa_supplicant drivers comma separatedctrl_interface directoryctrl_interface directoryPath to control directoryPath to control directoryctrl_interface groupctrl_interface groupGroup of control directoryGroup of control directorywpa_supplicantwpa_supplicantPath to interface listPath to interface listPath to directory which contains network devicesPath to directory which contains network devicesPath to rfkill device listPath to rfkill device listPath to directory which contains rfkill devicesPath to directory which contains rfkill devicesPrefered wireless interfacePrefered wireless interfaceOtherOtherSelect netctl-auto commandSelect netctl-auto commandSelect systemctl commandSelect systemctl commandSelect wpa_actiond commandSelect wpa_actiond commandsystemctl pathsystemctl pathPath to systemctlPath to systemctlnetctl-auto pathnetctl-auto pathPath to netctl-autoPath to netctl-autonetctl-auto servicenetctl-auto serviceName of netctl-auto systemd serviceName of netctl-auto systemd servicewpa_actiond pathwpa_actiond pathPath to wpa_actiondPath to wpa_actiondEnable system trayEnable system trayMinimize to tray instead of closingMinimize to tray instead of closingStart minimized to trayStart minimized to traySelect helper commandSelect helper commandActiveActiveStopStopInactiveInactiveStartStartHelperHelperHelper statusHelper statusUse helperUse helperForce use sudo in helperForce use sudo in helperClose helper after exitClose helper after exitHelper commandHelper commandHelper serviceHelper serviceName of netctlgui-helper serviceName of netctlgui-helper serviceActive (systemd)Active (systemd)It is recommended to use systemd integration. See `man 1 netctlgui-helper` for more details.It is recommended to use systemd integration. See `man 1 netctlgui-helper` for more details.Close helper after exit (doesn't work while systemd service is active)Close helper after exit (doesn't work while systemd service is active)There are too binaries. `netctlgui-helper` should be running as root (for example from systemd), otherwise interface `/ctrl` will not be available. `netctlgui-helper-suid` may be running as normal user, but you should keep it in mind that it has SUID bit.There are too binaries. `netctlgui-helper` should be running as root (for example from systemd), otherwise interface `/ctrl` will not be available. `netctlgui-helper-suid` may be running as normal user, but you should keep it in mind that it has SUID bit.Skip components checkingSkip components checkingToolbarsToolbarsControl groupControl groupMain toolbarMain toolbarLeftLeftRightRightTopTopBottomBottomDisabledDisablednetctl toolbarnetctl toolbarnetctl-auto toolbarnetctl-auto toolbarProfiles toolbarProfiles toolbarWiFi toolbarWiFi toolbarTrayIconnetctl statusnetctl statusQuitQuitShowShowShow netctl-autoShow netctl-autoStatusStatusHideHideHide netctl-autoHide netctl-autoProfileProfile(inactive)(inactive)(netctl-auto)(netctl-auto)(enabled)(enabled)(static)(static)Start another profileStart another profileStop %1Stop %1Restart %1Restart %1Disable %1Disable %1Enable %1Enable %1Start profileStart profileStop profileStop profileSwitch to profileSwitch to profileRestart profileRestart profileEnable profileEnable profilestaticstaticenabledenabledStop all profilesStop all profilesnetctl-autonetctl-autoTunnelWidgetFormFormTunnel settingsTunnel settingsModeModeipipipipgregresitsitisatapisatapip6ip6ip6ip6ipip6ipip6ip6greip6greanyanyThe tunnel typeThe tunnel typeLocalLocalThe address of the local end of the tunnelThe address of the local end of the tunnelRemoteRemoteThe address of the remote end of the tunnelThe address of the remote end of the tunnelTuntapWidgetFormFormTuntap settingsTuntap settingsModeModetuntuntaptapEither ‘tun’, or ‘tap’Either ‘tun’, or ‘tap’UserUserThe owning user of the tun/tap interfaceThe owning user of the tun/tap interfaceGroupGroupThe owning group of the tun/tap interfaceThe owning group of the tun/tap interfaceVlanWidgetFormFormvlan settingsvlan settingsvlan IDvlan IDvlan identifiervlan identifierWiFiMenuWidgetStartStartStopStopProcessing...Processing...MHzMHzNameNameTypeType# of points# of pointsSignalSignalSecuritySecurityActiveActiveExistsExists2GHz2GHz5GHz5GHz2GHz and 5GHz2GHz and 5GHzN\AN\APointPointRefreshRefreshStart WiFiStart WiFiStop WiFiStop WiFiPlease install 'wpa_supplicant' before use itPlease install 'wpa_supplicant' before use itInformationInformationThis isn't the functionality you're looking forThis isn't the functionality you're looking forRefresh tableRefresh tableCtrl+RCtrl+RConnect or disconnect from selected ESSIDConnect or disconnect from selected ESSIDPlease install 'wpa_supplicant' before using itPlease install 'wpa_supplicant' before using itWiFi menu toolbarWiFi menu toolbarWirelessWidgetHide advancedHide advancedShow advancedShow advancedFormFormWireless optionsWireless optionsSecuritySecuritynonenonewepwepwpawpawpa-configsectionwpa-configsectionwpa-configwpa-configESSIDESSIDThe name of the network to connect toThe name of the network to connect toWpa config sectionWpa config sectionAddAddArray of lines that form a network block for wpa_supplicantArray of lines that form a network block for wpa_supplicantWpa config fileWpa config filePath to a wpa_supplicant configuration filePath to a wpa_supplicant configuration fileBrowseBrowseKeyKeyThe secret key to a WEP, or WPA encrypted networkThe secret key to a WEP, or WPA encrypted networkWhether or not the specified network is a hidden networkWhether or not the specified network is a hidden networkHiddenHiddenWhether or not to use ad-hoc modeWhether or not to use ad-hoc modeAd-hocAd-hocScan frequenciesScan frequenciesA space-separated list of frequencies in MHz to scan when searching for the networkA space-separated list of frequencies in MHz to scan when searching for the networkPriorityPriorityPriority group for the networkPriority group for the networkCountryCountryThe country for which frequency regulations will be enforcedThe country for which frequency regulations will be enforcedWPA groupWPA groupGroup that has the authority to configure wpa_supplicant via its control interfaceGroup that has the authority to configure wpa_supplicant via its control interfaceDriversDriverswestwestnl80211nl80211wiredwiredThe wpa_supplicant driver to useThe wpa_supplicant driver to useRFkill deviceRFkill deviceThe name of an rfkill deviceThe name of an rfkill deviceTimeout WPATimeout WPAMaximum time, in seconds, to wait for steps in the association and authentication to succeedMaximum time, in seconds, to wait for steps in the association and authentication to succeedWhether or not to exclude this profile from automatic profile selectionWhether or not to exclude this profile from automatic profile selectionExclude autoExclude autoFrequencyFrequency