PppoeWidget 0 0 484 561 Form QDockWidget::NoDockWidgetFeatures PPPoE settings 1 0 Username Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 The username and password to connect with 1 0 Password Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 The username and password to connect with 1 0 Connection mode Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 This option specifies how a connection should be established persist demand 1 0 Idle timeout Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 This option specifies the idle time (in seconds) after which ‘pppd’ should disconnect 999 10 300 Qt::Horizontal 40 20 true true Qt::DownArrow 1 0 2 0 Use the default route provided by the peer Default route true 1 0 2 0 Use the DNS provided by the peer Use peer DNS true 1 0 2 0 Enable IPv6 support PPPoE IPv6 7 0 Options file Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 10 0 A file to read additional pppd options from 4 0 Browse 1 0 Max fail Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 The number of consecutive failed connection attempts to tolerate 1 5 1 0 PPP unit Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 Set the ppp unit number in the interface name (ppp0, ppp1, etc.) 1 0 LCP echo interval Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 These options override default LCP parameters from ‘/etc/ppp/options’ 1 499 30 1 0 LCP echo failure Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 These options override default LCP parameters from ‘/etc/ppp/options’ 1 4 1 0 PPPoE service Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 This option specifies the PPPoE service name 1 0 PPPoE AC Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 This option specifies the PPPoE access concentrator name 1 0 PPPoE session Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 This option specifies an existing session to attach to, MAC address 1 0 PPPoE MAC Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter 2 0 Only connect to specified MAC address