About About 概要 Acknowledgement 謝辞 AboutWindow Version %1 (build date %2) バージョン：%1 (ビルド日時：%2) Qt-based graphical interface for netctl. Qtベースのnetctl用グラフィカルインターフェース Translators: %1 翻訳者：%1 Links: リンク： Homepage ホームページ Repository レポジトリ Bugtracker バグトラッカ Translation issue 翻訳についてのissue AUR packages AURパッケージ This software is licensed under %1 このソフトウェアは%1の下で利用を許可される This software uses: %1 このソフトウェアは次を利用している：%1 About 概要 BridgeWidget Form フォーム Bridge settings ブリッジの設定 Skip (R)STP and immediately activate all bridge members (R)STPをスキップし直ちにすべてのブリッジメンバをアクティブにする Skip forwarding delay 転送遅延をスキップする ErrorWindow Error! エラー！ Could not find components コンポーネントを見付けられません Does not support yet まだサポートしていません Profile name is not set プロファイル名が設定されていません Bind interfaces are not set インターフェースとの紐付けが設定されていません Description is not set 説明が記載されていません Ip settings are not set IPの設定が指定されていません Configuration file does not exist 設定ファイルが存在しません Key is not set キーが設定されていません Wireless settings are not set 無線設定が指定されていません Configuration file is not set 設定ファイルが存在しません ESSID is not set ESSIDが設定されていません MAC address is incorrect MACアドレスが正しくありません Session ID is not set セッションIDが設定されていません APN is not set APNが設定されていません Empty user/group name ユーザ名/グループ名が空です Could not find profile プロファイルが見付かりません Could not find ESSID ESSIDを見付けられません Could not run helper ヘルパを起動できません Unknown error 不明なエラーです Sender : %1 送り手：%1 EthernetWidget Form フォーム Ethernet options イーサネットのオプション Hide advanced 詳細を隠す <html><head/><body>Whether or not the absence of a carrier is acceptable</body></html> Skip no carrier Set to ‘yes’ to use 802.1x authentication 802.1x authentication 802.1.x認証 WPA config file WPA設定ファイル Path to a wpa_supplicant configuration file wpa_supplicant設定ファイルへのパス Browse 見る WPA driver WPAドライバ The wpa_supplicant driver to use for 802.1x authentication 802.1.x認証利用の為のwpa_supplicantドライバ wired 有線 nl80211 nl80211 wext wext Timeout carrier Maximum time, in seconds, to wait for a carrier Timeout WPA Maximum time, in seconds, to wait for 802.1x authentication to succeed Select wpa configuration file WPA設定ファイルを選択 Configuration files (*.conf) 設定ファイル (*.conf) Show advanced GeneralWidget Form フォーム General 一般 Description 説明 <html><head/><body>A description of the profile</body></html> <html><head/><body>プロファイルの説明</body></html> Connection 接続 The connection type used by the profile プロファイルで利用される接続 Interface インターフェース The name of the associated network interface 確立されたネットワークインターフェースの名前 Binds to interfaces インターフェースとの紐付け Add 追加 An array of physical network interfaces that this profile needs before it can be started 開始前にプロファイルを必要とする物理ネットワークインターフェース Hide advanced 詳細を隠す After 以後 An array of profile names that should be started before this profile is started 開始前にプロファイルを必要とするプロファイル名 Command after starting 開始後に実行するコマンド A command that is executed after a connection is established コネクション確立後に実行されるコマンド Command before stoping 停止前に実行するコマンド A command that is executed before a connection is brought down コネクション切断前に実行されるコマンド Set to ‘yes’ to force connecting even if the interface is up Force connect 接続を強制 Debug mode デバッグモード Show advanced 詳細を表示 IpWidget Form フォーム IP options IPオプション IP IP dhcp DHCP static 静的 Address アドレス (IPv4) Add 追加 An array of IP addresses suffixed with ‘/<netmask>’ 追記されるIPアドレス Gateway ゲートウェイ (IPv4) An IP routing gateway address IPv4ルーティングゲートウェイアドレス IP6 IP6 dhcp-noaddr dhcp-noaddr stateless ステートレス Address6 アドレス (IPv6) An array of IPv6 addresses IPv6アドレス Gateway6 ゲートウェイ (IPv6) An IPv6 routing gateway address IPv6ルーティングゲートウェイアドレス Hide advanced 詳細を隠す Routes ルート (IPv4) via 経由 An array of custom routes カスタムされたルート Routes6 ルート (IPv6) Custom カスタム An array of argument lines to pass to ip IPへ渡す引数列 Hostname ホスト名 A system hostname システムのホスト名 Timeout DAD DADのタイムアウト Maximum time, in seconds, to wait for IPv6’s Duplicate Address Detection to succeed DHCP client DHCPクライアント The name of the preferred DHCP client 優先するDHCPクライアントの名前 dhcpcd dhcpcd dhclient dhclient dhcpcd options dhcpcdオプション Additional options to be passed to the DHCP client DHCPクライアントへ渡す追加オプション dhclient options dhclientオプション (IPv4) dhclient options (6) dhclientオプション (IPv6) Timeout DHCP DHCPのタイムアウト Maximum time, in seconds, to wait for DHCP to be successful Set to ‘yes’ to release the DHCP lease when the profile is stopped DHCP release on stop DNS DNS An array of DNS nameservers DNSネームサーバ DNS domain DNSドメイン A ‘domain’ line for /etc/resolv.conf /etc/resolv.confに対する 'domain' 行 DNS search DNS検索 A ‘search’ line for /etc/resolv.conf /etc/resolv.confに対する 'search' 行 DNS options DNSオプション An array of ‘options’ lines for /etc/resolv.conf /etc/resolv.confに対する 'options' 行 Show advanced 詳細を表示 MacvlanWidget Form フォーム macvlan settings macvlan設定 Mode モード MAC address MACアドレス Optional static MAC address 追加的な静的MACアドレス MainWindow Netctl GUI Connect to profile Name Description Refresh Restart Start Create a new profile Profile Clear Switch Stop all Load Edit Remove DBus API Library Report a bug Save Please install 'wpa_supplicant' before using it About netctl-auto is running Show Signal Security Menu Actions Help Settings Ctrl+S Quit Ctrl+Q Start profile Restart profile Enable profile Edit profile Remove profile netctl-auto Ready yes no Active Enabled Updated Stop profile Disable profile Exists Disable Enable ESSID Stop WiFi Start WiFi Done Error Stop Unknown flag Usage: Open window: start detached from console start maximized show about window show netctl-auto window show settings window Functions: Options: start minimized to tray select this ESSID open this profile select this profile Additional flags: read configuration from this file print debug information start with default settings set options for this run, comma separated open a tab with this number Show messages: show version and exit show build information and exit show this help and exit Build date: %1 cmake flags cmake properties Components Additional components Project properties DBus configuration Documentation Version Author License Restore existing session. Close existing session. Connection is successfully. Connection failed. Do you want to save profile %1? WiFi menu MobileWidget Form Mobile PPP settings Username The username and password to connect with Password Access point name The access point (apn) to connect on PIN If your modem requires a PIN to unlock, use this option Mode This option is used to specify the connection mode None 3Gpref 3Gonly GPRSpref GPRSonly Show advanced Max fail The number of consecutive failed connection attempts to tolerate Use the default route provided by the peer Default route Use the DNS provided by the peer Use peer DNS Options file A file to read additional pppd options from Browse Select options file Configuration files (*.conf) Hide advanced NetctlAutoWindow netctl-auto Esc Restart service Refresh Name Description Active Disabled Switch Menu Ready Disable service Enable service netctl-auto is running Stop service Start service netctl-auto is not running yes no Profile Updated Enable profile Enable all profiles Disable all profiles Enable Disable Done Error Disable profile Switch to profile Close PasswdWidget Form フォーム Password パスワード ESSID ESSID PppoeWidget Form PPPoE settings Username The username and password to connect with Password Connection mode This option specifies how a connection should be established persist demand Idle timeout This option specifies the idle time (in seconds) after which ‘pppd’ should disconnect Show advanced Max fail The number of consecutive failed connection attempts to tolerate Use the default route provided by the peer Default route Use the DNS provided by the peer Use peer DNS PPP unit Set the ppp unit number in the interface name (ppp0, ppp1, etc.) LCP echo interval These options override default LCP parameters from ‘/etc/ppp/options’ LCP echo failure Options file A file to read additional pppd options from Browse PPPoE service This option specifies the PPPoE service name PPPoE AC This option specifies the PPPoE access concentrator name PPPoE session This option specifies an existing session to attach to, MAC address PPPoE MAC Only connect to specified MAC address Enable IPv6 support PPPoE IPv6 Select options file Configuration files (*.conf) Hide advanced SettingsWindow Settings General Language Select a language netctl netctl path Path to netctl Browse Profile path Path to profile directory sudo sudo path Path to sudo wpa_supplicant Helper Enable system tray Minimize to tray instead of closing Start minimized to tray Skip components checking It is recommended to use systemd integration. See `man 1 netctlgui-helper` for more details. Helper status Use helper Force use sudo in helper Helper command Helper service Name of netctlgui-helper service systemctl path Path to systemctl netctl-auto path Path to netctl-auto netctl-auto service Name of netctl-auto systemd service wpa_supplicant path Path to wpa_supplicant wpa_cli path Path to wpa_cli PID file wpa_supplicant PID file wpa_supplicant drivers wpa_supplicant drivers comma separated ctrl_interface directory Path to control directory ctrl_interface group Group of control directory Other Close helper after exit (doesn't work while systemd service is active) Path to interface list Path to directory which contains network devices Path to rfkill device list Path to directory which contains rfkill devices Prefered wireless interface Select path to directory with interfaces Select netctl command All files (*) Select helper command Select netctl-auto command Select path to profile directory Select path to directory with rfkill devices Select sudo command Select systemctl command Select wpa_cli command Select wpa_supplicant command Active (systemd) Active Stop Inactive Start TrayIcon netctl status Profile (inactive) (netctl-auto) Start another profile Stop %1 Restart %1 Disable %1 Enable %1 Start profile Stop profile Stop all profiles Switch to profile Restart profile Enable profile Quit Show static enabled Show netctl-auto Status Hide TunnelWidget Form Tunnel settings Mode The tunnel type ipip gre sit isatap ip6ip6 ipip6 ip6gre any Local The address of the local end of the tunnel Remote The address of the remote end of the tunnel TuntapWidget Form フォーム Tuntap settings TUN/TAP設定 Mode モード Either ‘tun’, or ‘tap’ 'TUN' 又は 'TAP' のどれか tun TUN tap TAP User ユーザ The owning user of the tun/tap interface TUN/TAPインターフェースを所有するユーザ Group グループ The owning group of the tun/tap interface TUN/TAPインターフェースを所有するグループ VlanWidget Form フォーム vlan settings VLAN設定 vlan ID VLAN ID vlan identifier VLAN識別子 WirelessWidget Form Wireless options Security none wep wpa wpa-configsection wpa-config ESSID The name of the network to connect to Wpa config section Add Array of lines that form a network block for wpa_supplicant Wpa config file Path to a wpa_supplicant configuration file Browse Key The secret key to a WEP, or WPA encrypted network Whether or not the specified network is a hidden network Hidden Whether or not to use ad-hoc mode Ad-hoc Show advanced Scan frequencies A space-separated list of frequencies in MHz to scan when searching for the network Frequency Priority group for the network Priority Country The country for which frequency regulations will be enforced WPA group Group that has the authority to configure wpa_supplicant via its control interface Drivers west nl80211 wired The wpa_supplicant driver to use RFkill device The name of an rfkill device Timeout WPA Maximum time, in seconds, to wait for steps in the association and authentication to succeed Whether or not to exclude this profile from automatic profile selection Exclude auto Hide advanced