--- README.md.orig	2014-05-21 19:56:55.000000000 +0400
+++ README.md	2014-05-28 18:06:58.069570956 +0400
@@ -10,6 +10,7 @@
 Configuration
 -------------
 For edited output you must open Settings window and setup output format in lines:
+
 * tag `$time` - time in default format. For example, *fri Nov 6 04:48:01 2013*
 * tag `$isotime` - time in iso format
 * tag `$shorttime` - time in short locale format
@@ -27,9 +28,13 @@
 * tag `$mem` - usage memory, *%*
 * tag `$memmb` - usage memory, *MB*
 * tag `$memgb` - usage memory, *GB*
+* tag `$memtotmb` - total RAM, *MB*
+* tag `$memtotgb` - total RAM, *GB*
 * tag `$swap` - swap, *%*
 * tag `$swapmb` - swap, *MB*
 * tag `$swapgb` - swap, *GB*
+* tag `$swaptotmb` - total swap, *MB*
+* tag `$swaptotgb` - total swap, *GB*
 * tag `$hddN` - usage for mount point N, *%*. For example, `$hdd0`
 * tag `$hddmbN` - usage for mount point N, *MB*. For example, `$hddmb0`
 * tag `$hddgbN` - usage for mount point N, *GB*. For example, `$hddgb0`
@@ -56,6 +61,13 @@
 
 **NOTE** you don't may set to show `$cpu` tag in swap label for example. **`$cpu` will work only in cpu label**.
 
+Tips & tricks
+-------------
+
+You may use different colors for labels. Just put label text into html code. See [issue](https://github.com/arcan1s/pytextmonitor/issues/9) for more details.
+
+Numbering of elements of temperature, HDD usage, HDD speed, HDD temperature refers to elements order from second tab (*Advanced settings*). You should add item to the required listWidget first. And the first element in the listWidget will be `$tag0`. See [issue](https://github.com/arcan1s/pytextmonitor/issues/17) for more details.
+
 Advanced settings
 -----------------
 **Custom time**
@@ -130,10 +142,6 @@
 
 File with AC information. File (`/sys/class/power_supply/AC/online` by default) must contain `1` if AC is online.
 
-**Music player**
-
-Select one of supported music playes for player label.
-
 Tooltip settings
 ----------------
 Since version 1.7.0 CPU, CPU clock, memory, swap and network labels support graphical tooltip. To enable them just make the needed checkboxes a fully checked. The number of stored values can be set in the tab. Colors of graphs are configurable too.
@@ -148,11 +156,15 @@
 
 **GPU device**
 
-Select one of supported GPU devices. `auto` will enable auto selection. Default is `auto`.
+Select one of supported GPU devices. `auto` will enable auto selection, `disable` will disable definition of GPU states. Default is `auto`.
 
 **HDD**
 
-Select one of HDDs for HDD temperature monitor. `all` will enable monitor for all devices. Default is `all`.
+Select one of HDDs for HDD temperature monitor. `all` will enable monitor for all devices, `disable` will disable definition of HDD temperature. Default is `all`.
+
+**hddtemp cmd**
+
+Type a command which will be run for hddtemp DataEngine. Default is `sudo hddtemp`.
 
 **MPD address**
 
@@ -172,6 +184,9 @@
 * *FreeBSD*: `PKGCMD=pkg_version -I -l '<'`, `PKGNULL=0`
 * *Mandriva*: `PKGCMD=urpmq --auto-select`, `PKGNULL=0`
 
+**Music player**
+
+Select one of supported music playes for player label.
 
 DataEngine configuration
 ------------------------
@@ -191,7 +206,7 @@
 ---------------------
 * proprietary video driver
 * hddtemp (make sure that it may be run with `sudo` without password. Just add following line to `/etc/sudoers`: `$USERNAME ALL=NOPASSWD: /usr/bin/hddtemp`)
-* music player (amarok, mpd or qmmp)
+* music player (amarok, clementine, mpd or qmmp)
 
 Make dependencies
 -----------------