diff --git a/README.md b/README.md
index a27ba8c..1bb6c04 100644
--- a/README.md
+++ b/README.md
@@ -8,30 +8,30 @@ PyTextMonitor is a minimalistic Plasmoid script written on Python2. It looks lik
 Configuration
 -------------
 For edited output you must open Settings window and setup output format in lines:
-* label "$uptime" means uptime, ---d--h--m
-* label "$cpu" means total load cpu, %
-* label "$ccpu" means load CPU for each core, %
-* label "$cpucl" - average cpu clock, MHz
-* label "$ccpucl" - cpu clock for each core, MHz
-* label "$temp" - average temperature in system
-* label "$gpu" - GPU usage, %. `aticonfig` or `nvidia-smi` must be installed
-* label "$gputemp" - GPU temperature. `aticonfig` or `nvidia-smi` must be installed
-* label "$mem" - usage memory, %
-* label "$memmb" - usage memory, MB
-* label "$swap" - swap, %
-* label "$swapmb" - swap, MB
-* label "@@/@@" (in hdd label) - mount point ('/' in example) usage, %. Separator for mount points list is ';', for example "@@/;/home;/mnt/global@@". `hddtemp` must be installed
-* label "@@/dev/sda@@" (in hddtemp label) - HDD ('/dev/sda' in example) temperature
-* label "$net" - download and upload speed, KB/s. You may specify network device: something like @@eth0@@
-* label "$netdev" - current network device
-* label "$bat" - battery charge, %. Battery device may be set below. File ("/sys/class/power_supply/BAT0/capacity" by default) must contain only battery charge in percent
-* label "$ac" - status AC device. Return (*) if AC device is online or ( ) if offline. AC device may be set below. FIle ("/sys/class/power_supply/AC/online" by default) must contain '1' if AC is online
-* label "$artist" - current song artist. One of supported music players must be installed
-* label "$title" - current song title. One of supported music players must be installed
+* label `$uptime` means uptime, <i>---d--h--m</i>
+* label `$cpu` means total load cpu, <i>%</i>
+* label `$ccpu` means load CPU for each core, <i>%</i>
+* label `$cpucl` - average cpu clock, <i>MHz</i>
+* label `$ccpucl` - cpu clock for each core, <i>MHz</i>
+* label `$temp` - average temperature in system
+* label `$gpu` - GPU usage, <i>%</i>. `aticonfig` or `nvidia-smi` must be installed
+* label `$gputemp` - GPU temperature. `aticonfig` or `nvidia-smi` must be installed
+* label `$mem` - usage memory, <i>%</i>
+* label `$memmb` - usage memory, <i>MB</i>
+* label `$swap` - swap, <i>%</i>
+* label `$swapmb` - swap, <i>MB</i>
+* label `@@/@@` (in hdd label) - mount point (`/` in example) usage, <i>%</i>. Separator for mount points list is `;`, for example `@@/;/home;/mnt/global@@`
+* label `@@/dev/sda@@` (in hddtemp label) - HDD (`/dev/sda` in example) temperature. `hddtemp` must be installed
+* label `$net` - download and upload speed, <i>KB/s</i>. You may specify network device: something like `@@eth0@@`
+* label `$netdev` - current network device
+* label `$bat` - battery charge, <i>%</i>. Battery device may be set below. File (`/sys/class/power_supply/BAT0/capacity` by default) must contain only battery charge in percent
+* label `$ac` - status AC device. Return <i>(*)</i> if AC device is online or <i>( )</i> if offline. AC device may be set below. FIle (`/sys/class/power_supply/AC/online` by default) must contain `1` if AC is online
+* label `$artist` - current song artist. One of supported music players must be installed
+* label `$title` - current song title. One of supported music players must be installed
 
 Label order will changed if you change slider position. HTML tags in label work normally.
 
-**NOTE** you don't may set to show $cpu in swap label for example. $cpu will work only in cpu label.
+**NOTE** you don't may set to show $cpu in swap label for example. <b>$cpu will work only in cpu label</b>.
 
 TODO (wish) list
 ----------------
@@ -70,24 +70,22 @@ Installation
 * download sources
 * install dataengine
 
-    mkdir build && cd build
+        mkdir build && cd build
+        cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=`kde4-config --localprefix` ../
+        make && make install
 
-    cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=`kde4-config --localprefix` ../
+  Also you may install it to "/":
 
-    make && make install
+        cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix` ../
+        make && sudo make install
 
-Also you may install it to "/":
-
-    cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix` ../
-
-    make && sudo make install
 * install plasmoid
 
-    plasmapkg -i py-text-monitor-1.5.0.plasmoid
+        plasmapkg -i py-text-monitor-1.5.0.plasmoid
 
-Also you may install it to "/" too:
+  Also you may install it to "/" too:
 
-    plasmapkg -g -i py-text-monitor-1.5.0.plasmoid
+        plasmapkg -g -i py-text-monitor-1.5.0.plasmoid
 
 Additional information
 ======================