From 831b98f836af596c6385ed7b4600e50ed57cd59a Mon Sep 17 00:00:00 2001
From: arcan1s <esalexeev@gmail.com>
Date: Sat, 5 Apr 2014 19:21:22 +0400
Subject: [PATCH] release 1.7.3

---
 PKGBUILD     | 2 +-
 README.md    | 6 ++++--
 readme/en.md | 4 ++--
 readme/ru.md | 4 ++--
 4 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/PKGBUILD b/PKGBUILD
index 7ab5f88..f13a8fc 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -20,7 +20,7 @@ optdepends=("amarok: for music player monitor"
 makedepends=('automoc4' 'cmake')
 source=(https://github.com/arcan1s/pytextmonitor/releases/download/V.${pkgver}/${_pkgname}-${pkgver}-src.tar.xz)
 install=${pkgname}.install
-md5sums=('11e919f81c08a06bd86bed4a6c41752c')
+md5sums=('de9de52ffae7d94bd123cea801a411da')
 backup=('usr/share/config/extsysmon.conf')
 
 prepare() {
diff --git a/README.md b/README.md
index ccce318..06eb528 100644
--- a/README.md
+++ b/README.md
@@ -18,16 +18,18 @@ For edited output you must open Settings window and setup output format in lines
 * tag `$uptime` - uptime, *---d--h--m*
 * tag `$custom` - custom uptime format
 * tag `$cpu` - total load cpu, *%*
-* tag `$cpuN` - load CPU for core N, *%*. N should be in range 0 to 8
+* tag `$cpuN` - load CPU for core N, *%*. N should be in range 0 to 9
 * tag `$cpucl` - average cpu clock, *MHz*
-* tag `$cpuclN` - cpu clock for core N, *MHz*. N should be in range 0 to 8
+* tag `$cpuclN` - cpu clock for core N, *MHz*. N should be in range 0 to 9
 * tag `$tempN` - temperature for device N. For example, `$temp0`
 * tag `$gpu` - GPU usage, *%*. `aticonfig` or `nvidia-smi` must be installed
 * tag `$gputemp` - GPU temperature. `aticonfig` or `nvidia-smi` must be installed
 * tag `$mem` - usage memory, *%*
 * tag `$memmb` - usage memory, *MB*
+* tag `$memgb` - usage memory, *GB*
 * tag `$swap` - swap, *%*
 * tag `$swapmb` - swap, *MB*
+* tag `$swapgb` - swap, *GB*
 * tag `$hddN` - usage for mount point N, *%*. For example, `$hdd0`
 * tag `$hddtempN` - temperature for HDD N. For example, `$hddtemp0`
 * tag `$down` - download speed, *KB/s*
diff --git a/readme/en.md b/readme/en.md
index 5a6f9d9..06eb528 100644
--- a/readme/en.md
+++ b/readme/en.md
@@ -18,9 +18,9 @@ For edited output you must open Settings window and setup output format in lines
 * tag `$uptime` - uptime, *---d--h--m*
 * tag `$custom` - custom uptime format
 * tag `$cpu` - total load cpu, *%*
-* tag `$cpuN` - load CPU for core N, *%*. N should be in range 0 to 8
+* tag `$cpuN` - load CPU for core N, *%*. N should be in range 0 to 9
 * tag `$cpucl` - average cpu clock, *MHz*
-* tag `$cpuclN` - cpu clock for core N, *MHz*. N should be in range 0 to 8
+* tag `$cpuclN` - cpu clock for core N, *MHz*. N should be in range 0 to 9
 * tag `$tempN` - temperature for device N. For example, `$temp0`
 * tag `$gpu` - GPU usage, *%*. `aticonfig` or `nvidia-smi` must be installed
 * tag `$gputemp` - GPU temperature. `aticonfig` or `nvidia-smi` must be installed
diff --git a/readme/ru.md b/readme/ru.md
index 59b84db..43a10ab 100644
--- a/readme/ru.md
+++ b/readme/ru.md
@@ -16,9 +16,9 @@ PyTextMonitor - минималистичный плазмоид, написан
 * тэг `$uptime` - время работы, *---d--h--m*
 * тэг `$custom` - свой формат аптайма
 * тэг `$cpu` - общая загрузка CPU, *%*
-* тэг `$cpuN` - загрузка CPU для ядра N, *%*. N должно быть в промежутке от 0 до 8
+* тэг `$cpuN` - загрузка CPU для ядра N, *%*. N должно быть в промежутке от 0 до 9
 * тэг `$cpucl` - средняя частота CPU, *MHz*
-* тэг `$cpuclN` - частота CPU для ядра N, *MHz*. N должно быть в промежутке от 0 до 8
+* тэг `$cpuclN` - частота CPU для ядра N, *MHz*. N должно быть в промежутке от 0 до 9
 * тэг `$tempN` - температура для устройства N. Например, `$temp0`
 * тэг `$gpu` - использование GPU, *%*. `aticonfig` или `nvidia-smi` должны быть установлены
 * тэг `$gputemp` - температура GPU. `aticonfig` или `nvidia-smi` должны быть установлены